The ATM at 50: how a hole in the wall changed the world (2024)

Next time you withdraw money from a hole in the wall, consider singing a rendition of happy birthday. For on June 27, the Automated Teller Machine (or ATM) celebrates its half century. Fifty years ago, the first cash machine was put to work at the Enfield branch of Barclays Bank in London. Two days later, a Swedish device known as the Bankomat was in operation in Uppsala. And a couple of weeks after that, another one built by Chubb and Smith Industries was inaugurated in London by Westminster Bank (today part of RBS Group).

These events fired the starting gun for today’s self-service banking culture – long before the widespread acceptance of debit and credit cards. The success of the cash machine enabled people to make impromptu purchases, spend more money on weekend and evening leisure, and demand banking services when and where they wanted them. The infrastructure, systems and knowledge they spawned also enabled bankers to offer their customers point of sale terminals, and telephone and internet banking.

There was substantial media attention when these “robot cashiers” were launched. Banks promised their customers that the cash machine would liberate them from the shackles of business hours and banking at a single branch. But customers had to learn how to use – and remember – a PIN, perform a self-service transaction and trust a machine with their money.

People take these things for granted today, but when cash machines first appeared many had never before been in contact with advanced electronics.

And the system was far from perfect. Despite widespread demand, only bank customers considered to have “better credit” were offered the service. The early machines were also clunky, heavy (and dangerous) to move, insecure, unreliable, and seldom conveniently located.

Indeed, unlike today’s machines, the first ATMs could do only one thing: dispense a fixed amount of cash when activated by a paper token or bespoke plastic card issued to customers at retail branches during business hours. Once used, tokens would be stored by the machine so that branch staff could retrieve them and debit the appropriate accounts. The plastic cards, meanwhile, would have to be sent back to the customer by post. Needless to say, it took banks and technology companies years to agree common standards and finally deliver on their promise of 24/7 access to cash.

The globalisation effect

Estimates by RBR London concur with my research, suggesting that by 1970, there were still fewer than 1,500 of the machines around the world, concentrated in Europe, North America and Japan. But there were 40,000 by 1980 and a million by 2000.

A number of factors made this ATM explosion possible. First, sharing locations created more transaction volume at individual ATMs. This gave incentives for small and medium-sized financial institutions to invest in this technology. At one point, for instance, there were some 200 shared ATM networks in the US and 80 shared networks in Japan.

They also became more popular once banks digitised their records, allowing the machines to perform a host of other tasks, such as bank transfers, balance requests and bill payments. Over the last five decades, a huge number of people have made the shift away from the cash economy and into the banking system. Consequently, ATMs became a key way of avoiding congestion at branches.

ATM design began to accommodate people with visual and mobility disabilities, too. And in recent decades, many countries have allowed non-bank companies, known as Independent ATM Deployers (IAD) to operate machines. The IAD were key to populating non-bank locations such as corner shops, petrol stations and casinos.

Indeed, while a large bank in the UK might own 4,000 devices and one in the US as many as 12,000, Cardtronics, the largest IAD, manages a fleet of 230,000 ATMs in 11 countries.

The ATM at 50: how a hole in the wall changed the world (1)

Bank to the future

The ATM has remained a relevant and convenient self-service channel for the last half century – and its history is one of invention and re-invention, evolution rather than revolution.

Self-service banking and ATMs continue to evolve. Instead of PIN authentication, some ATMS now use “tap and go” contactless payment technology using bank cards and mobile phones. Meanwhile, ATMs in Poland and Japan have used biometric recognition, which can identify a customer’s iris, fingerprint or voice, for some time, while banks in other countries are considering them.

So it’s a good time to consider what the history of cash dispensers can teach us. The ATM was not the result of a eureka moment of a single middle-aged man in a bath or garage, but from active collaboration between various groups of bankers and engineers to solve the significant challenges of a changing world. It took two decades for the ATM to mature and gain widespread, worldwide acceptance, but today there are 3.5m ATMs with another 500,000 expected by 2020.

Research I am currently undertaking suggests that ATMs may have reached saturation point in some Western countries. However, research by the ATM Industry Association suggests there is strong demand for them in China, India and the Middle East. In fact, while in the West people tend to use them for three self-service functions (cash withdrawal, balance enquiries, and purchasing mobile phone airtime), Chinese customers consumers regularly use them for as many as 100 different tasks.

Taken for granted?

Interestingly, people in most urban areas around the world tend to interact with the same five ATMs. But they shouldn’t be taken for granted. In many countries in Africa, Asia and South America, they offer services to millions of people otherwise excluded from the banking sector.

In most developed counties, meanwhile, the retail branch and the ATM are the only two channels over which financial institutions have 100% control. This is important when you need to verify the authenticity of your customer. Banks do not control the make and model of their customers’ smart phones, tablets or personal computers, which are vulnerable to hacking and fraud. While ATMs are targeted by thieves, mass cybernetic attacks on them have yet to materialise.

I am often asked whether the advent of a cashless, digital economy heralds the end of the ATM. My response is that while the world might do away with cash and call ATMs something else, the revolution of automated self-service banking that began 50 years ago is here to stay.

The ATM at 50: how a hole in the wall changed the world (2024)

FAQs

The ATM at 50: how a hole in the wall changed the world? ›

Over the last five decades, a huge number of people have made the shift away from the cash economy and into the banking system. Consequently, ATMs became a key way of avoiding congestion at branches. ATM design began to accommodate people with visual and mobility disabilities, too.

How did the ATM change the world? ›

With the introduction of the ATM, people in rural areas and those who work during regular business hours can now access banking services at any time. The ATM has evolved to include more advanced functionalities, such as check deposits, account transfers, and bill #payments.

What did the ATM do? ›

An automated teller machine (ATM) is an electronic telecommunications device that enables customers of financial institutions to perform financial transactions, such as cash withdrawals, deposits, funds transfers, balance inquiries or account information inquiries, at any time and without the need for direct ...

What is through the wall ATM? ›

Through-The-Wall (TTW) ATMs are ATMs that will be installed inside the wall of a building or a kiosk. In-wall ATMs can be tricky to install and once they are installed can be considered a “permanent” fixture of the establishment.

When was the first ATM introduced in the world? ›

On June 27, 1967, Barclays Bank transformed the face of banking by introducing the world's first Automated Teller Machine (ATM). Nestled in the quiet town of Enfield, London, this innovation - dubbed the De La Rue Automatic Cash System - was the brainchild of John Shepherd-Barron, an employee of the De La Rue company.

Why is ATM important to us? ›

Wide Range of Services: ATMs provide a broad spectrum of banking services, from basic cash withdrawals to complex financial transactions. Financial Inclusion: ATMs enhance financial inclusion by providing access to banking services in areas where bank branches are scarce.

What job did ATMs replace? ›

Bank tellers

The introduction of the ATM (automated teller machine) in the 1960s was the first instance of bank teller jobs being lost to technology. Online banking, robo-advisors, financial chatbots, and contactless card payments have all contributed to the decline of human tellers in banks.

Who was the killer in ATM? ›

Corey and David enter the ATM to withdraw money, and shortly after, Emily joins them. She tells David the clicker for the car lock isn't working. When the three are about to leave, they turn to see a hooded figure lurking outside who is only known as THE MAN (Mike O'Brian).

What does ATM mean in slang? ›

2022/12/16. ATM is a text messaging acronym that literally means "at the moment" which means "at this present time" or "right now."

What is an interesting fact about ATMs? ›

The first ATM in America opened on September 2, 1969, at Chemical Bank in Rockville Center, New York. This first ATM in the US could only dispense cash, but by 1971 they had evolved to also perform other functions, including providing account balances. Still, the early ATMs only let people withdraw $14 at a time.

What is an ATM in the brain? ›

Mutations in the ATM gene, short for “ataxia-telangiectasia mutated,” results in the loss of a subset of brain cells called Purkinje cells, which signal to the part of the brain that controls movement in the cerebellar cortex. Thus, their degeneration causes ataxia, which is a loss of voluntary muscle movement.

How much money is inside ATM? ›

While your personal ATM withdrawal limit might range from a few hundred to a few thousand dollars a day, most bank ATMs are stocked with a set amount of cash, typically ranging from $50,000 to $200,000, spending on its location, size, and bill denominations.

What is the hole in the wall ATM UK? ›

The world's first "hole in the wall" was unveiled at Barclays bank in Enfield, north London, on June 27 1967. As a tribute to the golden anniversary, Barclays has transformed the modern-day ATM into gold. The invention was the brainchild of John Shepherd-Baron, who Barclays commissioned to create six cash dispensers.

What does "t" stand for in ATM? ›

Definition of ATM

ATM stands for an “Automated Teller Machine”.

What is ATM short for? ›

abbreviation for automated teller machine: a machine, usually in a wall outside a bank, store, etc. from which you can take money out of your bank account using a special card: Is there an ATM near here?

What did ATMs used to be called? ›

The machine was initially known as a Docuteller because it was manufactured by the firm Docutel and, like most early ATMs, its use was limited only to customers of the bank. Shared ATMs, in which consumers could use another bank's ATM to withdraw funds from their accounts, were introduced roughly a decade later.

What happened when ATMs were introduced? ›

It was a big deal for financial institutions (FIs) and their customers. No longer bound to banking hours when they just needed some cash, customers widely embraced ATMs—which probably didn't surprise the man most often credited for its invention: British inventor John Shepherd-Brown.

How did ATMs work before the internet? ›

The first ATMs were proprietary (i.e., the private property of a single individual or institution) and stand-alone (i.e., independent devices that did not connect to a network). These original ATMs were not PC-based; they did not have a PC processor or hard drive.

What is interesting about ATM? ›

An ATM isn't just for cash!

If you thought ATMs only dispensed cash, you're wrong! The first gold-plated machine was placed in the lobby of the Emirates Palace hotel in Abu Dhabi and dispenses 320 items made of gold. Currently there are twenty gold vending machines installed across three continents.

What was the ATM in ww2? ›

'ATM' was the designation of Allied military convoys (together with a numerical suffix) plying the route from Antwerp to the Thames river after delivering supplies and equipment for the Allies' northern group of military forces (US 12th and British 21st Army Groups) preparing for the final defeat of Germany (December ...

References

Top Articles
Latest Posts
Article information

Author: Maia Crooks Jr

Last Updated:

Views: 6071

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Maia Crooks Jr

Birthday: 1997-09-21

Address: 93119 Joseph Street, Peggyfurt, NC 11582

Phone: +2983088926881

Job: Principal Design Liaison

Hobby: Web surfing, Skiing, role-playing games, Sketching, Polo, Sewing, Genealogy

Introduction: My name is Maia Crooks Jr, I am a homely, joyous, shiny, successful, hilarious, thoughtful, joyous person who loves writing and wants to share my knowledge and understanding with you.